Wreckless4thf
03-10-2008, 05:15 PM
First Event Scheduled 04-19-08 This class is not set in stone yet. We are gauging interest to see how many would compete and still dusting the rules. Anyone interested?
REQUIREMENTS AND SPECIFICATIONS
REQUIREMENTS AND SPECIFICATIONS
ENGINE:
CYLINDER HEADS
Any Cylinder Head
CYLINDER BLOCK
Any engine block permitted. Any modifications permitted.
INDUCTION SYSTEM
Any induction system permitted.
EXHAUST SYSTEM
Mufflers, suitable for highway use, required. Exhaust must be routed towards the rear or sides of the vehicle. Turbocharged vehicles must have exhaust routed toward the rear and behind the front tires. Tail pipes not required.
ENGINE SETBACK
Permitted. Must not touch stock unmodified firewall.
FUEL
Any generally available gasoline permitted. No refueling permitted during or after the cruise and/or drag race part of the competition. Fuel supply must be adequate for 30-mile cruise and race.
FUEL SYSTEM
Properly mounted fuel tank or fuel cell required. No front mounted fuel cell.
RADIATOR
Front mounted radiator required. Water pump and fan may be electrically driven. No external device which in any way assists in cooling, either after the cruise or during the drag strip runs, is permitted.
NITROUS OXIDE
Permitted. Must be properly installed according to manufacturer’s recommendations.
SUPERCHARGERS / TURBOCHARGERS
Single supercharger or turbocharger permitted. Single roots style supercharger permitted. (6-71 roots style only) The only intercooler allowed will be air to air. No air to water intercoolers permitted.
DRIVE TRAIN:
CLUTCH
Clutch release must be manually operated by the driver’s foot.
REAR END
Heavy duty unit permitted.
TRANSMISSION
Any type transmission permitted. Reverse gear mandatory. Any shifting mechanism permitted. Neutral safety switch mandatory for automatic transmissions.
BRAKES & SUSPENSION:
BRAKES
Operational brakes required on all four wheels.
STEERING
Stock or aftermarket steering in the conventional location permitted.
SUSPENSION
Stock type suspension mandatory. Coil-over struts and shocks permitted, may replace OEM coil or leaf springs. Aftermarket leaf springs or heavy duty upper / lower rear control arms permitted, must bolt to the OEM locations on the chassis and the rear axle housing. Tubular front A-arms permitted. Any type anti sway bar system permitted. Ladder bars and 4 links permitted with weight penalty.
WHEELIE BARS
Not-Permitted
FRAME:
BALLAST
Permitted. Must be properly mounted. Loose ballast, tools, jacks, etc. not permitted.
BUMPERS
Stock or composite duplicates mandatory front and rear, may be molded into the body. Must be original size and shape. Customizing or front air dam permitted. Rear bumper may be notched or clearanced for wheelie bar installation.
FRAME
Stock OEM front sub frame required. Sub-frame connectors or reinforcing of frame permitted. Tubular front K-member permitted.
PARACHUTE
Permitted
TIRES & WHEELS
DOT approved and marked rear tires required during the cruise and drag strip runs. Tires may not be changed after cruise. Tire size is limited to what ever tire fits into the wheel tubs and upper fender opening. Tire tread may not have less that 1/8” depth tread pattern and may not protrude outside of rear fender area more than one (1) inch.
INTERIOR:
UPHOLSTERY
Approved and upholstered driver’s seat and passanger seat required , rear seat may be removed. Must have full carpet and factory style dash and headliner.
BODY Stock, steel production body shell required. Must maintain original height, width, length and contour. Hoods, Doors, Decklids, Fenders, may be fiberglass.
FIREWALL
Stock OEM firewall mandatory.
GRILLE
Must be stock production grille for body used.
HOOD / SCOOP
Any hood, cowl induction or hood scoop permitted, including composite material. Lift off hood permitted.
SPOILERS
Rear aftermarket spoiler attaching to rear of trunk lid or hatch permitted.
STREET EQUIPMENT
Working headlights, tail lights, brake lights, turn signals, windshield wiper motor (arms and blades optional) . All items are subject to inspection by tech officials.
WINDSHIELD / WINDOWS
Lexan or Plexiglass windows permitted.
ELECTRICAL:
BATTERY
Maximum of two batteries permitted. No external battery or charging device permitted at any time, either after the cruise or during the drag strip runs. An approved ON/OFF switch required for any battery re-location.
DELAY BOXES / DEVICES
Permitted
FIRE EXTINGUISHER SYSTEM
A correctly mounted fire extinguisher is strongly recommended.
TOW VEHICLES
Not permitted at any time during competition or proceeding the staging lanes.
DRIVER:
CREDENTIALS
All vehicles and / or drivers are required to have the following:
Valid driver’s license
Valid vehicle registration for the vehicle in competition.
Valid license plate(s) for the vehicle in competition.
VIN numbers for all above documentation must match VIN numbers for vehicle in competition.
DRIVER
All applicable safety equipment and apparel for the speed and ET required.
TECH PROCEDURE
All participating vehicles will be required to pass a track safety and credentials inspection. Pro Street participants will park in a designated Pro Street Impound Area for the tech inspection. No support vehicles, campers, trailers or non True Street participation vehicles will be permitted in this area. After the inspection, it is required that vehicles remain in this area. All participants in the Pro Street competition will leave on the cruise from this designated area. Any competitor (car and / or driver) not in the designated area, for any reason, when the cruise begins, will be disqualified. Headlights and taillights are required to be ON while on the cruise.
CRUISE PROCEDURE
The cruise is limited to vehicles that have passed the tech inspection. It will consist of 5 complete laps around the track.
RETURN / COOL DOWN PROCEDURE
All vehicles will return from the cruise and assume the same general position in the True Street pit area.
The cool down period will be not less than 30 minutes and will typically be longer. Opening the hood for any reason is prohibited and grounds for immediate disqualification. Engines must remain turned off during the cool down period. Repairs or adjustments performed through the hood, scoop, cowl or from underneath the vehicle are prohibited.
Opening the trunk, hatch, or doors is permitted for access to nitrous bottles or make inside car adjustments..
COMPETITION PROCEDURE
Pro Street Cars will be laddered and will race on a .400 Pro Tree. Tire pressure may be checked by the driver in the lanes between rounds. Tire pressure may be lowered, however, air may not be added to the tires at any time during the competition. Stopping in the pit area or return road for any reason between rounds is prohibited.
WEIGHT COMBINATIONS
Entry fee will be $40.00
The weight structure as of now are as follows, cars will be weighed before each pass.
2700#'s Small Block (One Stage)
2800#'s Small Block (2 Stages)
3000#'s Big Block (Limited to 1 Stage)
3200#'s Small Block Turbo/Supercharger (Air To Air Intercooler Only)
3300#'s Big Block Tubo/Supercharger (Air To Air Intercooler Only)
Take away 100#'s for N/A
Add 50#'s Fogger Instead Of Plate
Add 50# Ladder Bar Any Car
Add 100# 4 Link Any Car
Add 200#'s Modified Rear Frame Rails
After 3 Wins In One Year Car Must Move Up To Outlaw
__________________
REQUIREMENTS AND SPECIFICATIONS
REQUIREMENTS AND SPECIFICATIONS
ENGINE:
CYLINDER HEADS
Any Cylinder Head
CYLINDER BLOCK
Any engine block permitted. Any modifications permitted.
INDUCTION SYSTEM
Any induction system permitted.
EXHAUST SYSTEM
Mufflers, suitable for highway use, required. Exhaust must be routed towards the rear or sides of the vehicle. Turbocharged vehicles must have exhaust routed toward the rear and behind the front tires. Tail pipes not required.
ENGINE SETBACK
Permitted. Must not touch stock unmodified firewall.
FUEL
Any generally available gasoline permitted. No refueling permitted during or after the cruise and/or drag race part of the competition. Fuel supply must be adequate for 30-mile cruise and race.
FUEL SYSTEM
Properly mounted fuel tank or fuel cell required. No front mounted fuel cell.
RADIATOR
Front mounted radiator required. Water pump and fan may be electrically driven. No external device which in any way assists in cooling, either after the cruise or during the drag strip runs, is permitted.
NITROUS OXIDE
Permitted. Must be properly installed according to manufacturer’s recommendations.
SUPERCHARGERS / TURBOCHARGERS
Single supercharger or turbocharger permitted. Single roots style supercharger permitted. (6-71 roots style only) The only intercooler allowed will be air to air. No air to water intercoolers permitted.
DRIVE TRAIN:
CLUTCH
Clutch release must be manually operated by the driver’s foot.
REAR END
Heavy duty unit permitted.
TRANSMISSION
Any type transmission permitted. Reverse gear mandatory. Any shifting mechanism permitted. Neutral safety switch mandatory for automatic transmissions.
BRAKES & SUSPENSION:
BRAKES
Operational brakes required on all four wheels.
STEERING
Stock or aftermarket steering in the conventional location permitted.
SUSPENSION
Stock type suspension mandatory. Coil-over struts and shocks permitted, may replace OEM coil or leaf springs. Aftermarket leaf springs or heavy duty upper / lower rear control arms permitted, must bolt to the OEM locations on the chassis and the rear axle housing. Tubular front A-arms permitted. Any type anti sway bar system permitted. Ladder bars and 4 links permitted with weight penalty.
WHEELIE BARS
Not-Permitted
FRAME:
BALLAST
Permitted. Must be properly mounted. Loose ballast, tools, jacks, etc. not permitted.
BUMPERS
Stock or composite duplicates mandatory front and rear, may be molded into the body. Must be original size and shape. Customizing or front air dam permitted. Rear bumper may be notched or clearanced for wheelie bar installation.
FRAME
Stock OEM front sub frame required. Sub-frame connectors or reinforcing of frame permitted. Tubular front K-member permitted.
PARACHUTE
Permitted
TIRES & WHEELS
DOT approved and marked rear tires required during the cruise and drag strip runs. Tires may not be changed after cruise. Tire size is limited to what ever tire fits into the wheel tubs and upper fender opening. Tire tread may not have less that 1/8” depth tread pattern and may not protrude outside of rear fender area more than one (1) inch.
INTERIOR:
UPHOLSTERY
Approved and upholstered driver’s seat and passanger seat required , rear seat may be removed. Must have full carpet and factory style dash and headliner.
BODY Stock, steel production body shell required. Must maintain original height, width, length and contour. Hoods, Doors, Decklids, Fenders, may be fiberglass.
FIREWALL
Stock OEM firewall mandatory.
GRILLE
Must be stock production grille for body used.
HOOD / SCOOP
Any hood, cowl induction or hood scoop permitted, including composite material. Lift off hood permitted.
SPOILERS
Rear aftermarket spoiler attaching to rear of trunk lid or hatch permitted.
STREET EQUIPMENT
Working headlights, tail lights, brake lights, turn signals, windshield wiper motor (arms and blades optional) . All items are subject to inspection by tech officials.
WINDSHIELD / WINDOWS
Lexan or Plexiglass windows permitted.
ELECTRICAL:
BATTERY
Maximum of two batteries permitted. No external battery or charging device permitted at any time, either after the cruise or during the drag strip runs. An approved ON/OFF switch required for any battery re-location.
DELAY BOXES / DEVICES
Permitted
FIRE EXTINGUISHER SYSTEM
A correctly mounted fire extinguisher is strongly recommended.
TOW VEHICLES
Not permitted at any time during competition or proceeding the staging lanes.
DRIVER:
CREDENTIALS
All vehicles and / or drivers are required to have the following:
Valid driver’s license
Valid vehicle registration for the vehicle in competition.
Valid license plate(s) for the vehicle in competition.
VIN numbers for all above documentation must match VIN numbers for vehicle in competition.
DRIVER
All applicable safety equipment and apparel for the speed and ET required.
TECH PROCEDURE
All participating vehicles will be required to pass a track safety and credentials inspection. Pro Street participants will park in a designated Pro Street Impound Area for the tech inspection. No support vehicles, campers, trailers or non True Street participation vehicles will be permitted in this area. After the inspection, it is required that vehicles remain in this area. All participants in the Pro Street competition will leave on the cruise from this designated area. Any competitor (car and / or driver) not in the designated area, for any reason, when the cruise begins, will be disqualified. Headlights and taillights are required to be ON while on the cruise.
CRUISE PROCEDURE
The cruise is limited to vehicles that have passed the tech inspection. It will consist of 5 complete laps around the track.
RETURN / COOL DOWN PROCEDURE
All vehicles will return from the cruise and assume the same general position in the True Street pit area.
The cool down period will be not less than 30 minutes and will typically be longer. Opening the hood for any reason is prohibited and grounds for immediate disqualification. Engines must remain turned off during the cool down period. Repairs or adjustments performed through the hood, scoop, cowl or from underneath the vehicle are prohibited.
Opening the trunk, hatch, or doors is permitted for access to nitrous bottles or make inside car adjustments..
COMPETITION PROCEDURE
Pro Street Cars will be laddered and will race on a .400 Pro Tree. Tire pressure may be checked by the driver in the lanes between rounds. Tire pressure may be lowered, however, air may not be added to the tires at any time during the competition. Stopping in the pit area or return road for any reason between rounds is prohibited.
WEIGHT COMBINATIONS
Entry fee will be $40.00
The weight structure as of now are as follows, cars will be weighed before each pass.
2700#'s Small Block (One Stage)
2800#'s Small Block (2 Stages)
3000#'s Big Block (Limited to 1 Stage)
3200#'s Small Block Turbo/Supercharger (Air To Air Intercooler Only)
3300#'s Big Block Tubo/Supercharger (Air To Air Intercooler Only)
Take away 100#'s for N/A
Add 50#'s Fogger Instead Of Plate
Add 50# Ladder Bar Any Car
Add 100# 4 Link Any Car
Add 200#'s Modified Rear Frame Rails
After 3 Wins In One Year Car Must Move Up To Outlaw
__________________