kenscivic
05-20-2008, 02:44 PM
94 with 108k on the body and approx. 0 miles on the freshly rebuilt block (rods/pistons have about 7k miles on them)
block has h beam rods, forged flat top pistons, balanced eagle crank.. new bearings and all that good shit, bored .030 over os its a 355.
heads have been ported , stock valve size, 1.6 rr, dual valve springs, gmpp guideplates, chromoly pushrods, titanium lockers, retainers ..
dual spider webs so no breakage if you accidently over rev it.
the cam is a cc306, it will be tuned next weekend by buck (hopefully if he is free) with my lm-1 wideband.
k&n cai, ported maf, ported intake manifold , 36 lbs injectors (so if you wanna boost it, got the fuel set up for it). pacesetter longtube ceramic coated headers, offroad Y pipe (all o2 sensors ARE hooked up), bullet style muffler and dumptube...
new opti, pretty new alternator, AC WORKS!! (needs to be charged due to the motor coming out) new belts, It has been converted to a vented opti setup so it has the stout timing chain.. electric waterpump , 160* thermostat.. New rear main seal.. 58mm TB. egr delete
4.10 gear, edelbrock torque arm, Energy suspension motor mount, RAM HDX clutch..
motor is getting assembled sunday so anybody interested is mroe than welcome to come over and check out the parts at Ausbys house (if its okay with him)
looking to get 9000$ for the car.. only thing it needs is the a/c charged and a new cruise control cable.
Or would trade for a gas saver Plus some cash.:gamefreak
block has h beam rods, forged flat top pistons, balanced eagle crank.. new bearings and all that good shit, bored .030 over os its a 355.
heads have been ported , stock valve size, 1.6 rr, dual valve springs, gmpp guideplates, chromoly pushrods, titanium lockers, retainers ..
dual spider webs so no breakage if you accidently over rev it.
the cam is a cc306, it will be tuned next weekend by buck (hopefully if he is free) with my lm-1 wideband.
k&n cai, ported maf, ported intake manifold , 36 lbs injectors (so if you wanna boost it, got the fuel set up for it). pacesetter longtube ceramic coated headers, offroad Y pipe (all o2 sensors ARE hooked up), bullet style muffler and dumptube...
new opti, pretty new alternator, AC WORKS!! (needs to be charged due to the motor coming out) new belts, It has been converted to a vented opti setup so it has the stout timing chain.. electric waterpump , 160* thermostat.. New rear main seal.. 58mm TB. egr delete
4.10 gear, edelbrock torque arm, Energy suspension motor mount, RAM HDX clutch..
motor is getting assembled sunday so anybody interested is mroe than welcome to come over and check out the parts at Ausbys house (if its okay with him)
looking to get 9000$ for the car.. only thing it needs is the a/c charged and a new cruise control cable.
Or would trade for a gas saver Plus some cash.:gamefreak