DYNO DAY / OPEN HOUSE AT SOUTHEAST TURBO PERFORMANCE in Dallas

[SETURBO]

Hi,
Some of you know me, but I'm sure most don't know who I am. I'd like to take this time to introduce myself to those of you who don't know. My name is Paul Rogowski, and I own Southeast Turbo Performance here in Dallas. Many of you know my brother Pete (F22); now don't hold that against me, send email to my parents at...
For the past 7 years we specialized in Grand National / Turbo Regal cars. I still do a lot of work on and sell products for the Turbo Regals, but it is time to step it up a notch and have a little fun. Is that still possible for a shop owner?
We are currently working on a shop project car that will run in the NMRA SSO class next year. It is a small block based turbo car (of course) built off a 1992 Fox Body Drag Radial car previously owned in Tampa Florida. ZT Performance is currently upgrading the chassis. We will start posting the progress of the car on our website soon.

With all that said, I would like to invite everyone to our OPEN HOUSE / DYNO DAY this Saturday from 9:00AM - 6:00PM.

We have just installed a new 224xLC In-Ground Dynojet Chassis Dyno. We would like nothing more than to have you over as our guest this weekend to show off the Dyno and Facility.

Price: $45.00 for three pulls

I look forward to meeting a lot of you this weekend. Come out, relax, and enjoy watching the action! This is a Family Environment, my wife and two kids will be out to enjoy meeting your families, so don't be afraid to bring everyone along!

[Hi-psi]

Can you dyno diesels? I believe you need a special pickup for them due to no plug wires.

[sr290]

I will be there with 3 cars 1 240 sx sr20det 52 mm. 1 coupe mustang nos sbf. 1 1967 camaro nos bbc. Looking forward to the dyno time. All these cars are products of Zartech Race Cars Powder Springs (770) 712-1194 :burnout:

[SETURBO]

Yes - we DO have the capability to do Diesel !

[Hi-psi]

Now the next question is will my truck fit into your dyno bay....haha...

[SETURBO]

The Dyno Bay can handle anything that fits on the Dyno !

[A.P. Photography]

I think he means the height of your bay door. His truck is pretty high so it might not fit into the door.

[SETURBO]

The opening is 10'w x 12'h.

[Hi-psi]

I'll probably come by so we'll see.

[SETURBO]

Awesome ! It should be a great day ! I heard rumors about a possible horse power comp. going on ................

[Joe Dirt]

bump for ya guys wish you were not so far away.

[a408swinger]

Originally posted by SETURBO
Awesome ! It should be a great day ! I heard rumors about a possible horse power comp. going on ................

Congradulations Paul! Pete was telling me you were getting one. I need to come check your shop out now that you have expanded a little bit. Hope to see you soon.

Tom

[ProStreetZ28]

Paul, that's great that you got a load control dyno. I can think of a few projects that could use that for proper tuning. I got your message while I was on Power Tour, but I was a little busy. Give ma shout and I'll come by and take a look at it for you.
Jeff

[SETURBO]

Here are a few pics. I know Hi-psi would like to see the height of the back doors.

http://www.seturboperformance.com/images/DYNOJET%20CUSTOMERS%20CARS/Chassis%20Dyno%20Room.jpg


http://www.seturboperformance.com/images/DYNOJET%20CUSTOMERS%20CARS/DYNOJET%20224xLC%20iNSTALLATION%20SM.JPG


http://www.seturboperformance.com/images/DYNOJET%20CUSTOMERS%20CARS/Dynojet%20Installation%202%20sm.jpg


http://www.seturboperformance.com/images/DYNOJET%20CUSTOMERS%20CARS/Scott%20Skelton's%20GT%20Coupe.jpg


http://www.seturboperformance.com/images/DYNOJET%20CUSTOMERS%20CARS/Turbo%20Lamborghini%202%20sm.jpg

[Hi-psi]

Looks like it'll probably fit. I plan on being there. I'll talk to you then about those flanges since it seems like everytime I call you're not there or out in the shop.

[BeScurred]

Welcome aboad Paul...I already got my time set up for 1030...should be fun :) Good luck with the set up.

[Joe Dirt]

How many spaces are still open? just wondering thanks.

[Hi-psi]

Didn't see anywhere where it said you needed to reserve a slot, but if you do, put me down for one.

[Joe Dirt]

Originally posted by Hi-psi
Didn't see anywhere where it said you needed to reserve a slot, but if you do, put me down for one.


Thats why i was asking in case i was able to make the trip. :D

[SETURBO]

We currently have 17 slots reserved. Most between 9:00 to 12:00 noon. The afternoon is open. Call Suzette in the morning to get and update.

[Joe Dirt]

ttt

[SETURBO]

OK- How many of you haven't called for your appointment? I like to get head counts ! Suzette

[Joe Dirt]

up for you guys

[Joe Dirt]

bump again for the blind guys and gals in the back row.

[SVT1629]

hey paul, check pm's

[SETURBO]

If you aren't here- you are behind !

[Hi-psi]

Paul,

If you would, let me know if you got any pics and/or video of the truck on the dyno. Once again, thanks for putting on the event!