NOS plate on TPI

[cmexlr8]

Has anyone put NOS on a TPI before?(I know you have Chris) Are their any gotchas I need to know about. The car is pretty much a stock 5.7 roller with an aftermarket cat back exhaust and an adjustable fuel pressure regulator. I had not planned on upgrading my fuel system. Should I? I figure 150 is the biggest hose I am going to throw at it for now. With nitto DR's and the above mentioned mods, and with a 150 shot, what will this setup do at Brainerd?

[L98vette]

Originally posted by cmexlr8
Has anyone put NOS on a TPI before?(I know you have Chris) Are their any gotchas I need to know about. The car is pretty much a stock 5.7 roller with an aftermarket cat back exhaust and an adjustable fuel pressure regulator. I had not planned on upgrading my fuel system. Should I? I figure 150 is the biggest hose I am going to throw at it for now. With nitto DR's and the above mentioned mods, and with a 150 shot, what will this setup do at Brainerd?

no gotchas on that, EXCEPT, you must readjust the passing gear cable, and make sure you are still hitting WOT b/c it will move the throttle body forward about a half inch. try to set it up where u shift at 5,200 or so at WOT in drive.(3). This will give u the best track results. You should easily be running Mid 8's w/ that setup..even w/ stock manifolds.

[NOS/86]

you'll spin ! and run 9.0's .....

[L98vette]

Originally posted by NOS/86
you'll spin ! and run 9.0's .....

i think he has some tars for future plans, so maybe not.;)