SHOPEY
06-16-2007, 12:25 AM
I HAVE A QUICK FUEL 850 CARB.
JEGS PART # 793-Q-850
WILL TAKE $475.00 O.B.O
WORKS GREAT JUST NEED A BIGGER ONE.
HERE IS THE BUILD SHEET WHEN I GOT IT.
HERE IS A LINK OF A PIC OF THE CARB.
http://www.putfile.com/pic.php?img=3244676
PHONE 423-261-4892 IF NO ANSWER LEAVE MESSAGE
Custom Carburetor Calibration Sheet
Carburetor: Q-Series 850
Application: Drag Racing
Specifications:
Pri Jet: #76
Sec Jet: #84 W/Jet Extensions
P.V. Pri: #45
P.V. Sec.: Plugged
Pri Nozzle: #33
Sec Nozzle: #33
Acc Pump: 30cc Pri and Sec
Pump Cam: Pink Pri and Sec, position #1
Idle Air Bleeds: .071” 10-32 Screw-in Type
High Speed Bleeds: .033” 10-32 Screw-in Type
Floats: Brass Primary, Nitrophyl Secondary (notched for jet ext)
Features:
With modified PROFORM™ High Flow Main Body
Down-leg “stepped boosters, resized, contoured and polished venturi 1.400”
Billet metering blocks with 4 emulsion holes
.120” High Flow needle and seat assemblies
4500 style dual feed fuel bowls
Non-stick fuel bowl, metering block and flange gaskets
Nylon fuel inlet, fuel bowl screw, N&S lock nut and adj. nut gaskets
3/8” inverted flare fuel inlet fittings
A/N Red Anodized fuel inlet fittings
Billet Throttle Body
Adjustable secondary idle air cam bracket
Hollow, high flow pump nozzle screws (allen head)
Slabbed throttle shafts
Low profile, button head throttle plate screws (torx head)
Hand assembled
Engine tested
JEGS PART # 793-Q-850
WILL TAKE $475.00 O.B.O
WORKS GREAT JUST NEED A BIGGER ONE.
HERE IS THE BUILD SHEET WHEN I GOT IT.
HERE IS A LINK OF A PIC OF THE CARB.
http://www.putfile.com/pic.php?img=3244676
PHONE 423-261-4892 IF NO ANSWER LEAVE MESSAGE
Custom Carburetor Calibration Sheet
Carburetor: Q-Series 850
Application: Drag Racing
Specifications:
Pri Jet: #76
Sec Jet: #84 W/Jet Extensions
P.V. Pri: #45
P.V. Sec.: Plugged
Pri Nozzle: #33
Sec Nozzle: #33
Acc Pump: 30cc Pri and Sec
Pump Cam: Pink Pri and Sec, position #1
Idle Air Bleeds: .071” 10-32 Screw-in Type
High Speed Bleeds: .033” 10-32 Screw-in Type
Floats: Brass Primary, Nitrophyl Secondary (notched for jet ext)
Features:
With modified PROFORM™ High Flow Main Body
Down-leg “stepped boosters, resized, contoured and polished venturi 1.400”
Billet metering blocks with 4 emulsion holes
.120” High Flow needle and seat assemblies
4500 style dual feed fuel bowls
Non-stick fuel bowl, metering block and flange gaskets
Nylon fuel inlet, fuel bowl screw, N&S lock nut and adj. nut gaskets
3/8” inverted flare fuel inlet fittings
A/N Red Anodized fuel inlet fittings
Billet Throttle Body
Adjustable secondary idle air cam bracket
Hollow, high flow pump nozzle screws (allen head)
Slabbed throttle shafts
Low profile, button head throttle plate screws (torx head)
Hand assembled
Engine tested