Mustang9668
10-02-2007, 08:50 PM
Ok I am going to put everything in this thread. Here goes...
Professional Products Typhoon Intake- It is aluma coated. Not polished but looks similar to it. $300 Includes gasket b/t upper and lower.
Pics can be found in this thread (http://streetcarforums.com/showthread.php?t=89280).
I have an 4.6 aluminum shortblock that came out of an 02 explorer. It has 01 cobra pistons and rods that have around 20k miles on them. Using PI heads this will give you about a 11.5:1 compression. The previous owner had some carbon buildup on the pistons b/c of the high compression and no dyno tune but it is still in great shape. Would be very good for n/a or nitrous applications. One ear where one of the bellhousing bolts go through broke off when the last owner had it but it didn't affect anything at all.
$800 obo
I also have some 01 PI heads, cams, and intake complete with 50k miles on the heads and cams. The PI intake is off an 02 and has the aluminum crossover. I polished the aluminum crossover and it looks 10x better than that rough texture that comes factory. It only has about 20k miles on it. Asking $500 for the PI swap and the intake has the stock fuel rails and 19# injectors on it.
I have a BBK o/r x pipe off my 96 GT. I know it will fit 96-98 GT's, it might fit cobra's too but I am not sure. I believe it is 2 1/2 in. $75
Also have 2 sets of two chamber flowmaster. One set is dumped and the other is not. The one that is not dumped has flowtubes that connect to the midpipe on it though.
$50 firm for one set of 2.
Eibach Pro Kit springs- Should fit 79-04 Mustangs with a solid axle. Will not fit IRS. They only have about 25k miles on them. $125
Granatelli Motorsports Weight Jacker Lower Control Arms- Fit 94-04 Mustangs according to Summits website. They include bushings. They allow you to adjust the ride height. They onle have about 10k miles on them. $150
http://store.summitracing.com/partdetail.asp?part=GRN%2DGMCA7998WJ&view=1&N=700+150+4294908331+400382+4294870069+4294924746+
Stock rear sway bar off my 96 GT. $25
Authentic Saleen Side Skirts-94-98-includes door fillers-These are $490 new. Asking $250 obo.
http://www.haneymotorsport.com/Saleen%20aerodynamics%2094.htm
Professional Products Typhoon Intake- It is aluma coated. Not polished but looks similar to it. $300 Includes gasket b/t upper and lower.
Pics can be found in this thread (http://streetcarforums.com/showthread.php?t=89280).
I have an 4.6 aluminum shortblock that came out of an 02 explorer. It has 01 cobra pistons and rods that have around 20k miles on them. Using PI heads this will give you about a 11.5:1 compression. The previous owner had some carbon buildup on the pistons b/c of the high compression and no dyno tune but it is still in great shape. Would be very good for n/a or nitrous applications. One ear where one of the bellhousing bolts go through broke off when the last owner had it but it didn't affect anything at all.
$800 obo
I also have some 01 PI heads, cams, and intake complete with 50k miles on the heads and cams. The PI intake is off an 02 and has the aluminum crossover. I polished the aluminum crossover and it looks 10x better than that rough texture that comes factory. It only has about 20k miles on it. Asking $500 for the PI swap and the intake has the stock fuel rails and 19# injectors on it.
I have a BBK o/r x pipe off my 96 GT. I know it will fit 96-98 GT's, it might fit cobra's too but I am not sure. I believe it is 2 1/2 in. $75
Also have 2 sets of two chamber flowmaster. One set is dumped and the other is not. The one that is not dumped has flowtubes that connect to the midpipe on it though.
$50 firm for one set of 2.
Eibach Pro Kit springs- Should fit 79-04 Mustangs with a solid axle. Will not fit IRS. They only have about 25k miles on them. $125
Granatelli Motorsports Weight Jacker Lower Control Arms- Fit 94-04 Mustangs according to Summits website. They include bushings. They allow you to adjust the ride height. They onle have about 10k miles on them. $150
http://store.summitracing.com/partdetail.asp?part=GRN%2DGMCA7998WJ&view=1&N=700+150+4294908331+400382+4294870069+4294924746+
Stock rear sway bar off my 96 GT. $25
Authentic Saleen Side Skirts-94-98-includes door fillers-These are $490 new. Asking $250 obo.
http://www.haneymotorsport.com/Saleen%20aerodynamics%2094.htm