1992 Civic cx PART OUT EVERYTHING!!!

[dornon13]

Well ladies and gentlemen I have gone and wrecked my hatch and rather than fix it I am going to go ahead and part it out. I am selling EVERYTHING off this car so dont hesitate to ask for a small part. I will list the main things i would like to get rid of and you guys can ask for the minor pieces.

here goes most prices are OBO but are close to what i need out of them so no low balling. I have researched every part to get an idea of how much they go for so I dont think any of the prices are unreasonable.

Car/Parts located in Tullahoma, TN but i go to school in Chattanooga, TN

contact info:
Chris Dornon
chris_dornon@hotmail.com
aim: chris dornon13
pm works well too
for big items i will give out phone number over pms or email

Will post pictures of everything in about a week but untill then i can give pretty good descriptions of things.

THE LIST: (shipping not included)
B16 tranny (LS 5th) $650
http://www.dornonphotography.com/uploads/hondatech/partout/tranny1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/tranny2.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/tranny3.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/tranny4.JPG

ITR shift gold linkage $100
http://www.dornonphotography.com/uploads/hondatech/partout/shiftlinkage.JPG

Polished Hasport EG mounts $200
http://www.dornonphotography.com/uploads/hondatech/partout/mounts.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/mounts2.JPG


clutch master cylinder $??

Brake Master $??

Buddy Club P1 Racing SF wheels 15" white 4x100 13.2lbs each Total of 5 wheels 4 with brand new falken ZE912 (spare has old falken azenis 615) $600 OR TRADE got bronze?
Better pics once i can get them taken
http://www.dornonphotography.c...1.jpg (http://www.dornonphotography.com/uploads/hondatech/partout/000_0001.jpg)
http://www.dornonphotography.c...2.jpg (http://www.dornonphotography.com/uploads/hondatech/partout/000_0002.jpg)
http://www.dornonphotography.c...3.jpg (http://www.dornonphotography.com/uploads/hondatech/partout/000_0003.jpg)
http://www.dornonphotography.c...4.jpg (http://www.dornonphotography.com/uploads/hondatech/partout/000_0004.jpg)

Apexi World Sport Noir Flat Black Exhaust and magnaflow highflow cat $275 DROPPED!
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/ex1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/ex2.JPG)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/ex3.JPG)
http://www.dornonphotography.c...4.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/ex4.JPG)
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/cat1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/cat2.JPG)
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir2.JPG)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir3.JPG)
http://www.dornonphotography.c...4.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir4.JPG)
http://www.dornonphotography.c...5.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir5.JPG)

Jdm EG Fogs (replicas from JHP) with wiring and switch $75
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/fog1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/fog2.JPG)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/for3.JPG)
http://www.dornonphotography.c...4.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/fog4.JPG)
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir2.JPG)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir3.JPG)
http://www.dornonphotography.c...4.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir4.JPG)
http://www.dornonphotography.c...5.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/noir5.JPG)

GSR strutbar $40
http://www.dornonphotography.c...r.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/strutbar.JPG)

Benen Ind. Rear Lower Tie Bar $75
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/benentie1.JPG)

Center Console (cupholder and armrest) $45
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/center1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/center2.JPG)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/center3.JPG)
http://www.dornonphotography.c...4.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/center4.JPG)
http://www.dornonphotography.c...5.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/center5.JPG)
http://www.dornonphotography.c...6.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/center6.JPG)

Rear Leather EG seats Grey $100 (small tears near the hinges from wreck..no other damage once installed will look perfect)
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/rseats1.jpg)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/rseats2.jpg)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/rseats3.jpg)
http://www.dornonphotography.c...4.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/rseats4.jpg)

SIR front lip $50
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/lip1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/lip2.JPG)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/lip3.JPG)
http://www.dornonphotography.c...4.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/lip4.JPG)
http://www.dornonphotography.c...5.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/lip5.JPG)

Tokico Illumina shocks with cheap lowing springs (shocks good shape) $200

GSR Shift knob $20
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/shift1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/shift2.JPG)

Omni power front camber kit (needs $40 ball joints ) $50

ITR rear sway bar $100
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/sway3.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/sway2.JPG)
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/sway1.JPG)

Glove box $30
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/gb1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/gb2.JPG)

Gsr front Leather seats both ripped in the seat across middle $100obo
Recover bottom cusion and they will look awesome
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/DSC_6682.JPG)
http://www.dornonphotography.c...3.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/DSC_6673.JPG)

98 Civic ex Steering wheel $50
http://www.dornonphotography.c...1.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/sw1.JPG)
http://www.dornonphotography.c...2.JPG (http://www.dornonphotography.com/uploads/hondatech/partout/sw2.JPG)

Viper 791 Alarm with power lock conversion $200

Tail lights $80

door panels $30
http://www.dornonphotography.com/uploads/hondatech/partout/doorp1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp2.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp3.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp4.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp5.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/doorp6.JPG

Rear hatch $40
http://www.dornonphotography.com/uploads/hondatech/partout/hatch1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/hatch2.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/hatch3.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/hatch4.JPG

Rear Hatch Glass $50 (including rubber mounts)
http://www.dornonphotography.com/uploads/hondatech/partout/hatchglass.JPG

Manual Conversion (everything you see(minus throttle cable), probably can get most of the wiring too)
http://www.dornonphotography.com/uploads/hondatech/partout/manualconv.JPG

rear bumper $40 (small scrapage)
http://www.dornonphotography.com/uploads/hondatech/partout/rbumper1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/rbumper2.JPG

sideskirts $50
http://www.dornonphotography.com/uploads/hondatech/partout/skirts1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/skirts2.JPG


steering rack $15 (needs ball joints cuz i ripped them)
http://www.dornonphotography.com/uploads/hondatech/partout/srack1.JPG
http://www.dornonphotography.com/uploads/hondatech/partout/srack2.JPG





please bump for me I need to move parts as quickly as possible

before:

http://www.dornonphotography.com/uploads/hondatech/Hatch3.jpg

After:

http://www.dornonphotography.com/uploads/hondatech/0103081211a.jpg

[dornon13]

bump

[ablown95]

ttt

[dornon13]

up for pics

[dornon13]

up top lets get some parts moving tests are done for a few weeks i actually have some free time

[Natedawgg94]

how's the motor? if good pm me a price. thanks

[1badgvr4]

How much for the whole thing

[dornon13]

motor is sold. I have listed all the main parts i have. everything else is just detail pieces and such

the shell has a home coming the whole thing has been disected already

[dornon13]

bunch of parts added